overview

Home / guides

Canbus Setup

• Guide Using Katapult(previously known as CanBoot) Commands that are helpful: '''

Install katapult cd ~ git clone https://github.com/Arksine/katapult

Flash your board with Katapult cd katapult make menuconfig make clean make sudo dfu-util -a 0 -D ~/katapult/out/katapult.bin --dfuse-address 0x08000000:force:mass-erase:leave -d 0483:df11

** turn your printer off

**plug unplug usb, plug/connect canbus HIGH LOW POWER GROUND

** turn your printer back on

Get the canbus_UUID of your board python3 ~/katapult/scripts/flash_can.py -i can0 -q

Flash your board with klipper canbus configuration cd ~/klipper make menuconfig python3 ~/katapult/scripts/flash_can.py -i can0 -u CANBUS_UUID -f ~/klipper/out/klipper.bin

Confirm that your canbus UUID is falshed with klipper
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0

'''

Note

If you are looking for a setup guide for the MKS-THR series of tool headboards, click here

---

Calibration & Tuning

Calibration & Tuning

Orca Slicer calibration Guide - helpful site to save you from MATH

Ellis' Print Tuning Guide - Extruder Calibration - Build Surface Preparation & Handling - First Layer Squish - Pressure Advance / Linear Advance - Extrusion Multiplier - PA / EM Oddities - Cooling and Layer Times - Retraction - Infill/Perimeter Overlap - Stepover

---

Maintenance

• coming soon

---

Warning

This page is a work in progress. New guides will be added as they become available. Stay tuned for future updates!

Assembly Guides

• coming soon